Dell Force10 S4820T FTOS Command Reference Guide - Page 575
Table 20-1., Command Example Fields, Field, Description, Hot Failover
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 575 highlights
Line Card Config: Start-up Config: SFM Config State: Runtime Event Log: Running Config: FTOS# succeeded succeeded succeeded succeeded succeeded Jul 13 2007 21:28:53 Jul 13 2007 21:28:53 Jul 13 2007 21:28:53 Jul 13 2007 21:28:53 Jul 13 2007 21:28:53 Table 20-1. show redundancy Command Example Fields Field RPM Status PEER RPM Status RPM Redundancy Configuration RPM Failover Record Last Data Sync Record Description Displays the following information: • Slot number of the RPM • Whether the RPM is Primary or Standby • The state of the RPM: Active, Standby, Booting, or Offline • Whether the link to the second RPM is up or down. Displays the state of the second RPM, if present Displays the following information: • which RPM is the preferred Primary on next boot (redundancy primary command) • the data sync method configured (redundancy synchronize command). • the failover type (you cannot change this; it is software dependent) Hot Failover means the running configuration and routing table are applied on secondary RPM. Fast Failover means the running configuration is not applied on the secondary RPM till failover occurs, and the routing table on line cards is cleared during failover. • the status of auto booting the RPM (redundancy disable-auto-reboot command) • the parameter for auto failover limit control (redundancy auto-failover-limit command) Displays the following information: • RPM failover counter (to reset the counter, use the redundancy reset-counter command) • the time and date of the last RPM failover • the reason for the last RPM failover. Displays the data sync information and the timestamp for the data sync: • Start-up Config is the contents of the startup-config file. • Line Card Config is the line card types configured and interfaces on those line cards. • Runtime Event Log is the contents of the Event log. • Running Config is the current running-config. This field only appears when you enter the command from the Primary RPM. Example (S4820T) FTOS#show redundancy -- Stack-unit Status -- Mgmt ID: 0 Stack-unit ID: 0 Stack-unit Redundancy Role: Primary Stack-unit State: Active Stack-unit SW Version: FIT-R2D2-1-0-0-89 High Availability (HA) | 575