Dell Force10 S4820T FTOS Command Reference Guide - Page 1541

Table 58-1. Command Example Descriptions: show vrrp brief Item Interface Grp Pri Pre State Master addr Virtual addr(s) Description Lists the interface type, slot and port on which the VRRP group is configured. Displays the VRRP group ID. Displays the priority value assigned to the interface. If the track command is configured to track that interface and the interface is disabled, the cost is subtracted from the priority value assigned to the interface. States whether preempt is enabled on the interface. • Y = Preempt is enabled. • N = Preempt is not enabled. Displays the operational state of the interface by using one of the following: • NA/IF (the interface is not available). • MASTER (the interface associated with the MASTER router). • BACKUP (the interface associated with the BACKUP router). Displays the IP address of the MASTER router. Displays the virtual IP addresses of the VRRP routers associated with the interface. Example FTOS>show vrrp GigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253 State: Master, Priority: 105, Master: 10.1.1.253 (local) Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:01 Virtual IP address: 10.1.1.252 Authentication: (none) Tracking states for 1 interfaces: Up GigabitEthernet 12/17 priority-cost 10 GigabitEthernet 12/4, VRID: 2, Net: 10.1.2.253 State: Master, Priority: 110, Master: 10.1.2.253 (local) Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:02 Virtual IP address: 10.1.2.252 Authentication: (none) Tracking states for 2 interfaces: Up GigabitEthernet 2/1 priority-cost 10 Up GigabitEthernet 12/17 priority-cost 10 FTOS> Virtual Router Redundancy Protocol (VRRP) | 1541