Dell Force10 S4820T FTOS Command Reference Guide - Page 897

Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage Information You can configure up to 16 target TCP ports on the switch in one command or multiple commands. When you use the no iscsi target port command and the TCP port to be deleted is one bound to a specific IP address, the IP address value must be included in the command. show iscsi Display the currently configured iSCSI settings. Syntax show iscsi Command Mode EXEC EXEC Privilege Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Support added for cam modification. Introduced on MXL 10/40GbE Switch IO Module Example Related Commands FTOS#show iscsi iSCSI is enabled iSCSI session monitoring is disabled iSCSI COS : dot1p is 4 no-remark Session aging time: 10 Maximum number of connections is 256 iSCSI Targets and TCP Ports TCP Port Target IP Address 3260 860 show iscsi session show iscsi session detailed show run iscsi Display information on active iSCSI sessions on the switch. Display detailed information on active iSCSI sessions on the switch. show run iscsi show iscsi session Display information on active iSCSI sessions on the switch. Syntax show iscsi session iSCSI Optimization | 897