Dell Force10 S4820T FTOS Command Reference Guide - Page 922

www.dell.com | support.dell.com Parameters seconds level-1 level-2 Interval of transmission time between CSNPs on multi-access networks for the designated intermediate system. Range: 0 to 65535 Default: 10 (OPTIONAL) Independently configures the interval of time between transmission of CSNPs for Level 1. (OPTIONAL) Independently configures the interval of time between transmission of CSNPs for Level 2. Defaults seconds = 10; level-1 (if not otherwise specified) Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage Information The default values of this command are typically satisfactory transmission times for a specific interface on a designated intermediate system. To maintain database synchronization, the designated routers send CSNPs. Level 1 and Level 2 CSNP intervals can be configured independently. isis hello-interval e Specify the length of time between hello packets sent. Syntax isis hello-interval seconds [level-1 | level-2] To return to the default values, enter the no isis hello-interval [seconds] [level-1 | level-2] command. Parameters seconds level-1 level-2 Allows you to set the length of time between hello packet transmissions. Range: 1 to 65535 Default: 10 (OPTIONAL) Select this value to configure the hello interval for Level 1. This is the default. (OPTIONAL) Select this value to configure the hello interval for Level 2. Defaults seconds = 10; level-1 (if not otherwise specified) Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 922 | Intermediate System to Intermediate System (IS-IS)