Dell Force10 S4820T FTOS Command Reference Guide - Page 1445

Syntax Defaults Command Modes redundancy force-failover stack-unit Not enabled EXEC Privilege reset stack-unit s Reset any designated stack member except the management unit (master unit). Syntax reset stack-unit 0-11 hard Parameters 0-11 hard Enter the stack member unit identifier of the stack member to reset. Reset the stack unit if the unit is in a problem state. Default none Command Modes EXEC Command History Version 8.3.1.0 Version 7.8.1.0 Version 7.7.1.0 Added hard reset option. Augmented to run on the standby unit in order to reset the standby unit directly. Introduced on S-Series Usage Information Resetting the management unit is not allowed, and an error message will be displayed if you try to do so. Resetting is a soft reboot, including flushing the forwarding tables. Starting with FTOS 7.8.1.0, you can run this command directly on the stack standby unit (standby master) to reset the standby. You cannot reset any other unit from the standby unit. Example Stack MAC : 00:01:e8:8b:1a:36 Reload-Type : normal-reload [Next boot : normal-reload] -- Stack Info -- Unit UnitType Status ReqTyp CurTyp Version Ports 0 Management online S4810 S4810 8-3-12-1 64 1 Standby online S4810 S4810 8-3-12-1 64 2 Member online S4810 S4810 8-3-12-1 64 3 Member online S4810 S4810 8-3-12-1 64 4 Member online S4810 S4810 8-3-12-1 64 5 Member online S4810 S4810 8-3-12-1 64 6 Member not present 7 Member not present 8 Member not present 9 Member not present 10 Member not present 11 Member not present S-Series Stacking Commands | 1445