Dell Force10 S4820T FTOS Command Reference Guide - Page 1149

Usage Information This address is used by first-hop routers to send Register packets on behalf of source multicast hosts. The RP addresses are stored in the order in which they are entered. RP addresses learned via BSR take priority over static RP addresses. Without the override option, RPs advertised by the BSR updates take precedence over the statically configured RPs. ip pim rp-candidate c e s Configure a PIM router to send out a Candidate-RP-Advertisement message to the Bootstrap (BS) router or define group prefixes that are defined with the RP address to PIM BSR. Syntax Parameters Defaults Command Modes Command History Usage Information ip pim rp-candidate {interface [priority] To return to the default value, enter no ip pim rp-candidate {interface [priority] command. interface priority Enter the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the priority used in Bootstrap election process. Range: zero (0) to 255 Default: 192 Not configured. CONFIGURATION Version 8.3.19.0 Version 8.3.7.0 Version 8.1.1.0 Version 7.8.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced on E-Series ExaScale Introduced on S-Series Introduced on E-Series Priority is stored at BSR router when receiving a Candidate-RP-Advertisement. PIM-Sparse Mode (PIM-SM) | 1149