Dell Force10 S4820T FTOS Command Reference Guide - Page 293

Parameters Defaults Command Modes Command History Related Commands interface (OPTIONAL) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet followed by the slot/port information. • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a port-channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale, and 1 to 512 for ExaScale • For VLAN interfaces, enter the keyword vlan followed by a number from 1 to 4094. For ExaScale VLAN interfaces, the range is 1-2730 (VLAN IDs can be 0-4093). None EXEC Privilege Version 8.2.1.0 Version 7.7.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on E-Series ExaScale Introduced on C-Series Added support for VLAN and port-channel interfaces on E-Series Introduced on E-Series show bfd counters Display BFD counter information. debug bfd c e Enable BFD debugging. Syntax debug bfd {detail | event | packet} {all | interface} [mode] [count number] Parameters detail event packet all (OPTIONAL) Enter this keyword to display detailed information about BFD packets. (OPTIONAL) Enter this keyword to display information about BFD state. The mode option is not available with this option. (OPTIONAL) Enter the keyword packet to display brief information about control packets. Enter this keyword to enable debugging on all interfaces. The count option is not available with this option. Bidirectional Forwarding Detection (BFD) | 293