Dell Force10 S4820T FTOS Command Reference Guide - Page 337

max-paths c e s z Configure the maximum number of parallel routes (multipath support) BGP supports. Syntax Parameters Defaults Command Modes Usage Information Command History max-paths {ebgp | ibgp} number To return to the default values, enter no max-paths. ebgp ibgp number Enter the keyword ebgp to enable multipath support for External BGP routes. Enter the keyword ibgp to enable multipath support for Internal BGP routes. Enter a number as the maximum number of parallel paths. S4810, S4820T, Z9000 Range: 1 to 64 ExaScale Range: 1 to 16 Default: 1 none ROUTER BGP If you enable this command, use the clear ip bgp * command to recompute the best path. For optimal configuration, set the number variable to the highest possible value. Dell Force10 recommends maintaining the default setting or the next highest value. Version 8.3.19.0 Version 8.3.8.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820. Command syntax changed to max-paths (was maximum-paths). Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series neighbor activate c e s This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI (Address Family Identifier/Subsequent Address Family Identifier). Syntax neighbor [ip-address | peer-group-name] activate To disable, use the no neighbor [ip-address | peer-group-name] activate command. Border Gateway Protocol IPv4 (BGPv4) | 337