Dell Force10 S4820T FTOS Command Reference Guide - Page 926

www.dell.com | support.dell.com isis password e Configure an authentication password for an interface. Syntax isis password [hmac-md5] password [level-1 | level-2] To delete a password, enter the no isis password [password] [level-1 | level-2] command. Parameters encryption-type hmac-md5 password level-1 level-2 (OPTIONAL) Enter 7 to encrypt the password using DES. (OPTIONAL) Enter the keyword hmac-md5 to encrypt the password using MD5. Assign the interface authentication password. (OPTIONAL) Independently configures the authentication password for Level 1. The router acts as a station router for Level 1 routing. This is the default. (OPTIONAL) Independently configures the authentication password for Level 2. The router acts as an area router for Level 2 routing. Defaults No default password. level-1 (if not otherwise specified) Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage To protect your network from unauthorized access, use this command to prevent unauthorized routers Information from forming adjacencies. You can assign different passwords for different routing levels by using the level-1 and level-2 keywords. The no form of this command disables the password for Level 1 or Level 2 routing, using the respective keywords level-1 or level-2. This password provides limited security as it is processed as plain text. isis priority e Set priority of the designated router you select. Syntax isis priority value [level-1 | level-2] To return to the default values, enter the no isis priority [value] [level-1 | level-2] command. 926 | Intermediate System to Intermediate System (IS-IS)