Dell Force10 S4820T FTOS Command Reference Guide - Page 146
Ctrl-z, specific information of a show command.
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
www.dell.com | support.dell.com Usage Information Dell Force10 Application Software Version: FTOS 7.6.1.0 Copyright (c) 1999-2007 by Dell Force10 Networks, Inc. Build Time: Tue Sep 12 15:39:17 IST 2006 Build Path: /sites/maa/work/sw/purushothaman/cser-latest/depot/main/Dev/ Cyclone/Force10 uptime is 18 minutes System Type: S50N Control Processor: MPC8451E with 255545344 bytes of memory. 32M bytes of Boot-Flash memory. 1 48-port E/FE/GE (SB) 48 GigabitEthernet/IEEE 802.3 interface(s) 4 Ten GigabitEthernet/IEEE 802.3 interface(s) show clock 12:03:01.695 UTC Wed Nov 21 2007 show running-config Current Configuration ... ! Version E_MAIN4.7.5.414 ! Last configuration change at Wed Nov 21 11:42:19 2007 by default ! service timestamps log datetime ! hostname Force10 ! enable password 7 xxxxxxxx ! username admin password 7 xxxxxxxx ! enable restricted 7 xxxxxxxx ! interface GigabitEthernet 0/1 no ip address shutdown ! interface GigabitEthernet 0/2 no ip address shutdown output truncated Without the page or stack-unit option, the command output is continuous, use Ctrl-z to interrupt the command output. The save option works with other filtering commands. This allows you to save specific information of a show command. The save entry should always be the last option. For example: FTOS#show tech-support |grep regular-expression |except regular-expression | find regular-expression | save flash://result This display output is an accumulation of the same information that is displayed when you execute one of the following show commands: • show cam • show clock • show environment • show file 146 | Control and Monitoring