Dell Force10 S4820T FTOS Command Reference Guide - Page 470
dcb-output, dcb-policy input
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
www.dell.com | support.dell.com dcb-output Create a DCB output policy to associate an ETS configuration with priority traffic. Syntax dcb-output policy-name To remove the ETS output policy globally, use the no dcb output policy-name command. Parameters policy-name Enter the DCB output policy name. Maximum: 32 alphanumeric characters. Defaults none Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage Information Create a DCB output policy to associate a priority group with an ETS output policy with scheduling and bandwidth configuration. You can apply a DCB output policy on multiple egress ports. When you apply an ETS output policy on an interface, ETS-configured scheduling and bandwidth allocation take precedence over any configured settings in QoS output policies. The ETS configuration associated with 802.1 priority traffic in a DCB output policy is used in DCBX negotiation with ETS peers. Related Commands dcb-policy output Apply the output policy. dcb-policy input Apply the input policy with the PFC configuration to an ingress interface. Syntax dcb-policy input policy-name To delete the input policy, use the no dcb-policy input command. Parameters policy name Enter the input policy name with the PFC configuration to an ingress interface. Defaults none Command Modes INTERFACE 470 | Data Center Bridging