Dell Force10 S4820T FTOS Command Reference Guide - Page 342

www.dell.com | support.dell.com Defaults Command Modes Command History Not configured. ROUTER BGP Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series neighbor distribute-list c e s Distribute BGP information via an established prefix list. Syntax Parameters Defaults Command Modes Usage Information Related Commands Command History neighbor {ip-address | peer-group-name} distribute-list prefix-list-name {in | out} To delete a neighbor distribution list, use the no neighbor {ip-address | peer-group-name} distribute-list prefix-list-name {in | out} command. ip-address peer-group-name prefix-list-name in out Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to apply the distribute list filter to all routers in the peer group. Enter the name of an established prefix list. If the prefix list is not configured, the default is permit (to allow all routes). Enter the keyword in to distribute only inbound traffic. Enter the keyword out to distribute only outbound traffic. Not configured. ROUTER BGP Other BGP filtering commands include neighbor filter-list, ip as-path access-list and neighbor route-map. ip as-path access-list neighbor filter-list neighbor route-map Configure IP AS-Path ACL. Assign a AS-PATH list to a neighbor or peer group. Assign a route map to a neighbor or peer group. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series 342 | Border Gateway Protocol IPv4 (BGPv4)