Dell Force10 S4820T FTOS Command Reference Guide - Page 1421

Defaults Command Modes Command History version 1 | 2c | 3 auth noauth priv community-string udp-port port-number notification-type (OPTIONAL) Enter the keyword version to specify the security model followed by the security model version number 1, 2c, or 3. • Version 1 is the least secure version • version 3 is the most secure of the security modes. • Version 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. Default: Version 1 (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword noauth to specify no authentication of a packet. (OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet. Enter a text string (up to 20 characters long) as the name of the SNMP community. Note: For version 1 and version 2c security models, this string represents the name of the SNMP community. The string can be set using this command, however it is recommended that you set the community string using the snmp-server community command before executing this command. For version 3 security model, this string is the USM user security name. (OPTIONAL) Enter the keywords udp-port followed by the port number of the remote host to use. Range: 0 to 65535. Default: 162 (OPTIONAL) Enter one of the following keywords for the type of trap to be sent to the host: • bgp - BGP state change • envmon - Environment monitor trap • snmp - SNMP notification (RFC 1157) • stp - Spanning Tree protocol notification (RFC 1493) • vrrp - State change in a VRRP group • xstp - State change in MSTP (802.1s), RSTP (802.1w), and PVST+ Default: All trap types are sent to host. As shown CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.11.1 Introduced on Z9000 Version 8.3.7.0 Introduced on S4810 Version 8.4.1.0 Support was added for VRRP traps. Version 7.6.1.0 Support added for S-Series; Added support for STP and xSTP notification types. Version 7.5.1.0 Support added for C-Series E-Series legacy command Simple Network Management Protocol and Syslog | 1421