Dell Force10 S4820T FTOS Command Reference Guide - Page 762

www.dell.com | support.dell.com Example FTOS(conf-ipv6-acl)#show config ! ipv6 access-list Acl1 seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count FTOS(conf-ipv6-acl)# show ipv6 accounting access-list c e s View the IPv6 access-lists created on the E-Series and the sequence of filters. Syntax show ipv6 accounting {access-list access-list-name | cam_count} interface interface Parameters access-list-name cam_count interface interface Enter the name of the ACL to be displayed, up to 140 characters. List the count of the CAM rules for this ACL. Enter the keyword interface followed by the interface type and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Command Modes EXEC EXEC Privilege Command History Version 8.5.1.0 Version 8.4.2.1 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Added support for 4-port 40G line cards on ExaScale. Introduced on the S-Series Introduced on the E-Series ExaScale Introduced on the C-Series Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the E-Series TeraScale 762 | IPv6 Access Control Lists (IPv6 ACLs)