Dell Force10 S4820T FTOS Command Reference Guide - Page 1255

Parameters min number max number Enter the keyword min followed by the minimum threshold number for the WRED profile. Range: 1024 to 77824 KB Enter the keyword max followed by the maximum threshold number for the WRED profile. Range: 1024 to 77824 KB Defaults No default behavior or values Command Modes CONFIGURATION (config-wred) Command History Usage Information pre-Version 6.1.1.1 Introduced on E-Series Use this command to configure minimum and maximum threshold values for user defined profiles. Additionally, use this command to modify the minimum and maximum threshold values for the pre-defined WRED profiles. If you delete threshold values of the pre-defined WRED profiles, the profiles will revert to their original default values. Table 42-8. Pre-defined WRED Profile Threshold Values Pre-defined WRED Profile Name Minimum Threshold Maximum Threshold wred_drop 0 0 wred_ge_y 1024 2048 wred_ge_g 2048 4096 wred_teng_y 4096 8192 wred_teng_g 8192 16384 Related Commands wred-profile Create a WRED profile. trust c e s Specify dynamic classification (DSCP) or dot1p to trust. Syntax trust {diffserv [fallback]| dot1p [fallback]| ipv6-diffserv} Parameters diffserv dot1p fallback ipv6-diffserv Enter the keyword diffserv to specify trust of DSCP markings. Enter the keyword dot1p to specify trust dot1p configuration. Enter this keyword to classify packets according to their DSCP value as a secondary option in case no match occurs against the configured class maps. On E-Series only, enter the keyword ipv6-diffserv to specify trust configuration of IPv6 DSCP. Defaults No default behavior or values Quality of Service (QoS) | 1255