Dell Force10 S4820T FTOS Command Reference Guide - Page 1536

www.dell.com | support.dell.com Parameters Command Modes Command History Usage Information interface vrrp-id all bfd packets state timer Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Port Channel interface types, enter the keyword port-channel followed by the number: C-Series and S-Series Range: 1 to 128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by the VLAN ID. The VLAN ID range is from 1 to 4094. (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID. Enter the keyword all to enable debugging of all VRRP groups. Enter the keyword bfd to enable debugging of all VFFP BFD interactions Enter the keyword packets to enable debugging of VRRP control packets. Enter the keyword state to enable debugging of VRRP state changes. Enter the keyword timer to enable debugging of the VRRP timer. EXEC Privilege Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on C-Series Introduced on E-Series If no options are specified, debug is active on all interfaces and all VRRP groups. description c e s Configure a short text string describing the VRRP group. Syntax Parameters Defaults Command Modes Command History description text To delete a VRRP group description, enter no description. text Enter a text string up to 80 characters long. Not enabled. VRRP Version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Introduced on S4820T Introduced on S4810 Introduced on S-Series 1536 | Virtual Router Redundancy Protocol (VRRP)