Dell Force10 S4820T FTOS Command Reference Guide - Page 433
show reload-type, stop jump-start
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 433 highlights
Related Commands Use the reload-type command in BMP 2.0 to toggle between Normal and Jumpstart auto-configuration modes. The reload settings for the auto-configuration mode that you configure are stored in memory and retained for future reboots and BMP software upgrades. You can enter the reload command at any time to reload the switch in the last configured mode: Normal reload or Jumpstart mode. show reload-type stop jump-start Display the current reload mode (Normal or jump-start mode) Stops the Jumpstart process to prevent a loop if the DHCP server is not found. show reload-type Display the currently configured reload mode. Syntax Defaults show reload-type None Command Modes EXEC Privilege Command History Version 8.3.19.1 Introduced on S4820T. Version 8.3.10.1 Introduced on S4810. Usage Information Use the show reload-type command to check the currently configured auto-configuration mode (Jumpstart or Normal reload) on a switch running BMP 2.0. You can also use the show bootvar command to display the current reload mode for BMP 2.0 with the path of the FTOS image file retrieved from a DHCP server. Example FTOS#show reload-type Reload-Type : Related Commands reload-type normal-reload [Next boot : normal-reload] Configure the reload mode as normal or Jumpstart. stop jump-start Stop the switch from reloading in Jumpstart mode to prevent an infinite loop. Syntax Defaults Command Modes stop jump-start None EXEC Privilege Bare Metal Provisioning | 433