Dell Force10 S4820T FTOS Command Reference Guide - Page 1112

www.dell.com | support.dell.com 3.3.3.3 1.1.1.1 FTOS# -/-/-/ 2 10.0.0.2 Gi 0/1 1 E/-/-/ 0 0.0.0.0 - 0 You can determine if an ASBR is in a directly connected area (or not) by the flags. For ASBRs in a directly connected area, E flags are set. In the figure above, router 1.1.1.1 is in a directly connected area since the Flag is E/-/-/. For remote ASBRs, the E flag is clear (-/-/-/) show ip ospf database c e s Display all LSA information. If OSPF is not enabled on the switch, no output is generated. Syntax show ip ospf process-id database [database-summary] Parameters process-id database-summary Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Enter the keywords database-summary to the display the number of LSA types in each area and the total number of LSAs. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series FTOS>show ip ospf 1 database OSPF Router with ID (11.1.2.1) (Process ID 1) Router (Area 0.0.0.0) Link ID ADV Router Age Seq# Checksum 11.1.2.1 11.1.2.1 673 0x80000005 0x707e 13.1.1.1 13.1.1.1 676 0x80000097 0x1035 192.68.135.2 192.68.135.2 1419 0x80000294 0x9cbd Link count 2 2 1 Link ID 10.2.3.2 10.2.4.2 Network (Area 0.0.0.0) ADV Router Age 13.1.1.1 676 192.68.135.2 908 Seq# 0x80000003 0x80000055 Checksum 0x6592 0x683e Link ID 0.0.0.0 1.1.1.1 10.1.1.0 10.1.2.0 Type-5 AS External ADV Router Age 192.68.135.2 908 192.68.135.2 908 11.1.2.1 718 11.1.2.1 718 Seq# 0x80000052 0x8000002a 0x80000002 0x80000002 Checksum Tag 0xeb83 100 0xbd27 0 0x9012 0 0x851c 0 1112 | Open Shortest Path First (OSPFv2)