Dell Force10 S4820T FTOS Command Reference Guide - Page 689
View a log of IP packets sent and received., To disable debugging, use the, command., EXEC Privilege
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 689 highlights
c e s View a log of IP packets sent and received. Syntax Parameters Command Mode Command History Example debug ip packet [access-group name] [count value] [interface] To disable debugging, use the no debug ip packet [access-group name] [count value] [interface] command. access-group name count value interface EXEC Privilege Enter the keyword access-group followed by the access list name (maximum 16 characters) to limit the debug output based on the defined rules in the ACL. (OPTIONAL) Enter the keyword count followed by the count value. Range: 1 to 65534 Default: Infinity (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet followed by the slot/port information. • For the management interface on the RPM, enter the keyword managementethernet followed by the slot/port information. The slot range is 0-1 and the port range is 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Version 8.3.19.0 Version 8.5.1.0 Version 8.3.7.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.3.1.0 Introduced on S4820T Added support for 4-port 40G line cards on ExaScale. Introduced on S4810 Support 4094 VLANs on E-Series ExaScale (prior limit was 2094) Introduced on E-Series ExaScale Added the access-group option Introduced on S-Series Introduced on C-Series Added the count option IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 54, sending IPv4 Routing | 689