Dell Force10 S4820T FTOS Command Reference Guide - Page 417
show ip bgp ipv4 multicast neighbors, located in the same
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 417 highlights
Capabilities received from neighbor for IPv4 unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Capabilities advertised to neighbor for IPv4 Multicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Update source set to Loopback 0 For address family: IPv4 Multicast BGP table version 14, neighbor version 14 3 accepted prefixes consume 12 bytes Prefixes accepted 1 (consume 4 bytes), withdrawn 0 by peer Prefixes advertised 0, rejected 0, withdrawn 0 from peer Connections established 2; dropped 1 Last reset 00:03:17, due to user reset Notification History 'Connection Reset' Sent : 1 Recv: 0 Local host: 100.10.10.1, Local port: 179 Foreign host: 25.25.25.25, Foreign port: 2290 BGP neighbor is 211.1.1.129, remote AS 640, external link BGP version 4, remote router ID 0.0.0.0 BGP state ACTIVE, in this state for 00:00:36 Last read 00:00:41, hold time is 180, keepalive interval is 60 seconds Received 28 messages, 0 notifications, 0 in queue Sent 6 messages, 3 notifications, 0 in queue Received 18 updates, Sent 6 updates Route refresh request: received 0, sent 0 Minimum time between advertisement runs is 30 seconds For address family: IPv4 Multicast BGP table version 14, neighbor version 0 0 accepted prefixes consume 0 bytes Prefix advertised 0, rejected 0, withdrawn 0 Connections established 3; dropped 3 Last reset 00:00:37, due to user reset Notification History 'Connection Reset' Sent : 3 Recv: 0 No active TCP connection FTOS# Table 9-18. Command Example fields: show ip bgp ipv4 multicast neighbors Lines beginning with BGP neighbor BGP version BGP state Description Displays the BGP neighbor address and its AS number. The last phrase in the line indicates whether the link between the BGP router and its neighbor is an external or internal one. If they are located in the same AS, then the link is internal; otherwise the link is external. Displays the BGP version (always version 4) and the remote router ID. Displays the neighbor's BGP state and the amount of time in hours:minutes:seconds it has been in that state. Border Gateway Protocol IPv4 (BGPv4) | 417