Dell Force10 S4820T FTOS Command Reference Guide - Page 555

clear gvrp statistics c e s Clear GVRP statistics on an interface. Syntax Parameters Defaults Command Modes Command History Related Commands clear gvrp statistics interface interface interface interface Enter the following keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1 to 128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. No default values or behavior. EXEC Version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Introduced on S4820T Introduced on S4810 Introduced on C, E, and S-Series show gvrp statistics Display the GVRP statistics debug gvrp c e s Enable debugging on GVRP. Syntax Parameters debug gvrp {config | events | pdu} To disable debugging, use the no debug gvrp {config | events | pdu} command. config event Enter the keyword config to enable debugging on the GVRP configuration. Enter the keyword event to enable debugging on the JOIN/LEAVE events. Not available on the S4810 or S4820T. GARP VLAN Registration (GVRP) | 555