Dell Force10 S4820T FTOS Command Reference Guide - Page 1384

www.dell.com | support.dell.com port port destination precedence precedence tos tos-value count byte log Defaults Command Modes Command History Not configured. TRACE LIST Version 7.4.1.0 Related Commands deny permit (OPTIONAL) Enter the application layer port number. Enter two port numbers if using the range logical operand. Range: 0 to 65535 The following list includes some common TCP port numbers: • 23 = Telnet • 20 and 21 = FTP • 25 = SMTP • 169 = SNMP Enter the IP address of the network or host to which the packets are sent. Enter the keyword precedence followed by a number from 0 to 7 as the precedence value. Enter the keyword tos followed by a number from 0 to 15 as the TOS value. (OPTIONAL) Enter the keyword count to count packets processed by the filter. (OPTIONAL) Enter the keyword byte to count only bytes processed by the filter. (OPTIONAL) Enter the keyword log to have the information kept in a Trace-list log file. Deprecated established keyword - not supported on TeraScale line cards. Configure a filter to drop packets. Configure a filter to forward packets. show config e Syntax Command Modes Example View the current IP trace list configuration. show config TRACE LIST FTOS(config-trace-acl)#show config ! ip trace-list suzanne seq 5 deny tcp any any FTOS(config-trace-acl)# 1384 | Security