Dell Force10 S4820T FTOS Command Reference Guide - Page 65

Usage Information Related Commands FPGA restore in progress. Please do NOT power off the card Upgrade result Linecard 4 FPGA restore successful. Reset the card using the power-cycle option after restoring the FPGA command. reset Reset a card. upgrade fpga-image c Upgrade the primary FPGA image. Syntax upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga | link-fpga] | all} {booted | file-url} Parameters rpm number linecard number all system-fpga link-fpga booted file-url Enter rpm followed by the RPM slot number to upgrade an RPM FPGA Range: 0-1 Enter linecard followed by the line card slot number to upgrade a linecard FPGA. Range: 0-7 on the C300, 0-3 on the C150 Enter the keyword all to upgrade all RPM and linecard FPGAs. Enter the keyword all after the keyword rpm to upgrade all FPGAs on all RPMs. Enter the keyword all after the keyword linecard to upgrade all FPGAs on all linecards. (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a fiber linecard. Contact the Dell Force10 TAC before using this keyword. (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber linecard. Contact the Dell Force10 TAC before using this keyword. Upgrade the FPGA image using the currently running FTOS image. Enter the following location keywords and information to upgrade the FPGA using an FTOS image other than the one currently running: • To specify an FTOS image on the internal flash, enter flash:// file-path/filename. • To specify an FTOS image on an FTP server, enter ftp:// user:password@hostip/filepath • To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/filename • To copy a file on a TFTP server, enter tftp://hostip/filepath/ filename Defaults None. File Management | 65