Dell Force10 S4820T FTOS Command Reference Guide - Page 936
redistribute bgp
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 936 highlights
www.dell.com | support.dell.com Related Commands How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the metric-style command. If the metric-style command is set for narrow or transition mode and the metric value in the redistribute command is set to a number higher than 63, the metric value advertised in LSPs will be 63. If the metric-style command is set for wide mode, an the metric value in the redistribute command is advertised. default-information originate distribute-list out Generate a default route for the IS-IS domain. Suppress networks from being advertised in updates. Redistributed routing information is filtered by this command. redistribute bgp e Redistribute routing information from a BGP process. (new command in Release 6.3.1) Syntax redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-value] [metric-type {external| internal}] [route-map map-name] To return to the default values, enter the no redistribute bgp command with the appropriate parameters. Parameters AS number level-1 level-1-2 level-2 metric metric-value metric-type {external| internal} route-map map-name Enter a number that corresponds to the Autonomous System number. Range: 1 to 65355 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes only. This is the default. (OPTIONAL) The value used for the redistributed route. You should use a metric value that is consistent with the destination protocol. Range: 0 to 16777215 Default: 0. (OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are: • external • internal map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes will be imported. Defaults IS-IS Level 2 routes only Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) 936 | Intermediate System to Intermediate System (IS-IS)