Dell Force10 S4820T FTOS Command Reference Guide - Page 73

Parameters Defaults Command Modes Command History Usage Information all ipv4-fib ipv6-fib interval time-in-minutes Enter the keyword all to enable CAM audit on all line cards. Enter the keyword ipv4-fib to designate the CAM audit on the IPv4 forwarding entries. Enter the keyword ipv6-fib to designate the CAM audit on the IPv6 forwarding entries. Enter the keyword interval followed by the frequency in minutes of the CAM audit. Range: 5 to 1440 minutes (24 hours) Default: 60 minutes Disabled CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.10.0 Introduced on S4810 Enables periodic audits of software and hardware copies of the IPv4 and IPv6 forwarding table. clear alarms c e s Clear alarms on the system. Syntax Command Modes clear alarms EXEC Privilege Command History Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage Information This command clear alarms that are no longer active. If an alarm situation is still active, it is n in the system output. clear command history c e s Clear the command history log. Syntax Command Modes clear command history EXEC Privilege Control and Monitoring | 73