Dell Force10 S4820T FTOS Command Reference Guide - Page 309

both count Enter this keyword to indicate that the system will send and accept multiple paths from peers. Enter the number of paths supported. Range: 2-64 Defaults Disabled Command Modes ROUTER BGP Related Commands neighbor add-path Specify that this neighbor/peer group can send/receive multiple path advertisements. Command History . Version 8.3.19.0 Introduced on the S4820T. Version 8.3.8.0 Introduced on the S4810. bgp always-compare-med c e s Enables you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different external ASs. Syntax bgp always-compare-med To disable comparison of MED, enter no bgp always-compare-med. Defaults Disabled (that is, the software only compares MEDs from neighbors within the same AS). Command Modes ROUTER BGP Usage Information Any update without a MED attribute is the least preferred route If you enable this command, use the clear ip bgp * command to recompute the best path. Command History . Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced command Introduced support on C-Series Border Gateway Protocol IPv4 (BGPv4) | 309