Dell Force10 S4820T FTOS Command Reference Guide - Page 785

show ipv6 flowlabel-zero Display the flow label zero setting. Syntax show ipv6 flowlabel-zero Default Disabled Command Mode EXEC Command History Version 8.3.19.0 Introduced on the S4820T. Version 8.3.12.0 Introduced on the S4810. Related Commands ipv6 nd dad attempts Configure system to set the flow label field in the packets to zero. show ipv6 interface c e s Display the status of interfaces configured for IPv6. Syntax Parameters show ipv6 interface interface [brief] [configured] [gigabitethernet slot | slot/port] [linecard slot-number] [loopback interface-number] [managementethernet slot/port] [port-channel number] [tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port][vlan vlan-id] interface brief configured gigabitethernet (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword Loopback followed by a number from 0 to 16383. • For the Null interface, enter the keyword null followed by zero (0). • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN interface, enter the keyword VLAN. • For a port channel interface, enter the keyword port-channel. (OPTIONAL) View a summary of IPv6 interfaces. (OPTIONAL) View information on all IPv6 configured interfaces (OPTIONAL) View information for an IPv6 gigabitethernet interface. IPv6 Basics | 785