Dell Force10 S4820T FTOS Command Reference Guide - Page 381

Command Modes Command History Example (S4810 & S4820T) Example (partial) EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.19.0 Version 8.3.8.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Version 7.2.1.0 Version 6.3.10 Added the add-path option to the S4820T. Output on the S4820T shows ADDPATH parameters. Introduced on the S4820T. Added the add-path option to the S4810. Output on the S4810 shows ADDPATH parameters. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series Added detail option and output now displays default MED value Added received and denied route options The output is changed to display the total number of advertised prefixes FTOS#show ip bgp neighbors BGP neighbor is 10.10.10.1, remote AS 23456, external link BGP version 4, remote router ID 10.10.10.1 BGP state ESTABLISHED, in this state for 00:00:35 . . . Capabilities received from neighbor for IPv4 Unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) 4_OCTECT_AS(65) ADD_PATH (69) CISCO_ROUTE_REFRESH(128) FTOS#show ip bgp neighbors BGP neighbor is 100.10.10.2, remote AS 200, external link BGP version 4, remote router ID 192.168.2.101 BGP state ESTABLISHED, in this state for 00:16:12 Last read 00:00:12, last write 00:00:03 Hold time is 180, keepalive interval is 60 seconds Received 1404 messages, 0 in queue 3 opens, 1 notifications, 1394 updates 6 keepalives, 0 route refresh requests Sent 48 messages, 0 in queue 3 opens, 2 notifications, 0 updates 43 keepalives, 0 route refresh requests Minimum time between advertisement runs is 30 seconds Minimum time before advertisements start is 0 seconds Capabilities received from neighbor for IPv4 Unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Capabilities advertised to neighbor for IPv4 Unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) ROUTE_REFRESH(2) GRACEFUL_RESTART(64) CISCO_ROUTE_REFRESH(128) Border Gateway Protocol IPv4 (BGPv4) | 381