Dell Force10 S4820T FTOS Command Reference Guide - Page 254

www.dell.com | support.dell.com ip prefix-list c e s Enter the PREFIX-LIST mode and configure a prefix list. Syntax Parameters Command Modes Command History Usage Information Related Commands ip prefix-list prefix-name prefix-name Enter a string up to 16 characters long as the name of the prefix list, up to 140 characters long. CONFIGURATION Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Support added for S-Series Support added for C-Series Introduced for E-Series Prefix lists redistribute OSPF and RIP routes meeting specific criteria. For related RIP commands supported on C-Series and E-Series, refer to the Routing Information Protocol (RIP) chapter. For related OSPF commands supported on all three platforms, refer to the E-Series E-Series FTOS Command Line Reference Guide Open Shortest Path First (OSPFv2) chapter. Prior to 7.8.1.0, names are up to 16 characters long. show ip route list Display IP routes in an IP prefix list. show ip prefix-list summary Display a summary of the configured prefix lists. permit c e s Syntax Parameters Command Modes Configure a filter that passes packets meeting the criteria specified. permit ip-prefix [ge min-prefix-length] [le max-prefix-length] ip-prefix ge min-prefix-length le max-prefix-length PREFIX-LIST Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0. (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. 254 | Access Control Lists (ACL)