Dell Force10 S4820T FTOS Command Reference Guide - Page 1143
ip pim bsr-candidate
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1143 highlights
Usage Information This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by time out. Candidate RP advertisements can be cleaned using the clear ip pim rp-mapping command. ip pim bsr-candidate c e s Configure the PIM router to join the Bootstrap election process. Syntax Parameters Defaults Command Modes Command History ip pim bsr-candidate interface [hash-mask-length] [priority] To return to the default value, enter no ip pim bsr-candidate. interface hash-mask-length priority Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1 to 128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the hash mask length. Range: zero (0) to 32 Default: 30 (OPTIONAL) Enter the priority used in Bootstrap election process. Range: zero (0) to 255 Default: zero (0) Not configured. CONFIGURATION Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 6.1.1.0 Introduced on S4820T Introduced on S4810 Introduced on S-Series Added support for VLAN interface PIM-Sparse Mode (PIM-SM) | 1143