Dell Force10 S4820T FTOS Command Reference Guide - Page 243

Usage Information Related Commands When you use the log option, CP processor logs details about the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets' details. permit seq Configure a MAC address filter to pass packets. Configure a MAC address filter with a specified sequence number. mac access-list standard c e s Name a new or existing MAC access control list (MAC ACL) and enter the MAC ACCESS LIST mode to configure a standard MAC ACL. Refer to Commands Common to all ACL Types and Common MAC Access List Commands. Syntax mac access-list standard mac-list-name Parameters mac-list-name Enter a text string as the name of the standard MAC access list (140 character maximum). Defaults Not configured Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Support added for S-Series Support added for C-Series Introduced for E-Series Usage Information FTOS supports one ingress and one egress MAC ACL per interface. Prior to 7.8.1.0, names are up to 16 characters long. The number of entries allowed per ACL is hardware-dependent. Refer to your line card documentation for detailed specification on entries allowed per ACL. C-Series and S-Series support ingress ACLs only. Access Control Lists (ACL) | 243