Dell Force10 S4820T FTOS Command Reference Guide - Page 1259

Command Modes EXEC EXEC Privilege Command History Usage Information Version 6.2.1.1 Introduced If a Policy QoS is applied on an interface when clear queue statistics egress is issued, it will clear the egress counters in show queue statistics and vice-versa. This behavior is due to the values being read from the same hardware registers. Related Commands clear queue statistics egress show queue statistics egress show queue statistics ingress Clear ingress queue statistics Display egress queue statistics Display ingress queue statistics clear queue statistics ingress e Clear ingress queue statistics. Syntax clear queue statistics ingress [unicast [src-card ID [dst-card ID]] | [multicast] [src-card ID]] Parameters unicast [src-card ID [dst-card ID]] multicast [src-card ID] (OPTIONAL) Enter the keyword unicast to clear Unicast queue statistics. Optionally, enter the source card identification (src-card ID) and the destination card identification (dst-card ID ) to clear the unicast statistics from the source card to the destination card. (OPTIONAL) Enter the keyword multicast to clear only Multicast queue statistics. Optionally, enter the source card identification (src-card ID) to clear the multicast statistics from the source card. Default: Both Unicast and Multicast queue statistics are cleared. Defaults No default behavior or values Command Modes EXEC EXEC Privilege Command History Related Commands Version 6.2.1.1 Introduced clear queue statistics egress show queue statistics egress show queue statistics ingress Clear egress queue statistics Display egress queue statistics Display ingress queue statistics show queue statistics egress e Display the egress queue statistics. Syntax show queue statistics egress [unicast | multicast] [Interface] [brief] Quality of Service (QoS) | 1259