Dell Force10 S4820T FTOS Command Reference Guide - Page 717

10.10.10.10 0 011 0 00:00:00:00:00:00 3f01 CP FTOS# Table 24-9. show ip cam Command Example Fields Field Destination EC CG V C V Id Mac Addr Port Description Displays the destination route of the index. Displays the number of equal cost multipaths (ECMP) available for the default route for non-Jumbo line cards. Displays 0,1 when ECMP is more than 8, for Jumbo line cards. Displays 0. Displays a 1 if the entry is valid and a 0 otherwise. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port. Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor Gi = Gigabit Ethernet interface Te = 10 Gigabit Ethernet interface Example (show ip cam stack-unit ecmp-group detail) FTOS#show ip cam stack-unit 0 po 0 ecmp-group detail Destination EC CG V C VId Mac-Addr Port ECMP Group-Index 1.1.1.2 0 010 0 00:01:e8:8a:d6:58 0004 Te 0/3 - 2.1.1.2 0 010 0 00:01:e8:8a:d6:58 0009 Te 0/8 - 1.1.1.1 0 011 0 00:00:00:00:00:00 3f01 CP - 2.1.1.1 0 011 0 00:00:00:00:00:00 3f01 CP - 1.1.1.0 0 011 0 00:00:00:00:00:00 3f01 CP - 2.1.1.0 0 011 0 00:00:00:00:00:00 3f01 CP - 100.1.1.0 1 010 0 00:01:e8:8a:d6:58 0004 Te 0/3 0 100.1.1.0 1 010 0 00:01:e8:8a:d6:58 0009 Te 0/8 0 0.0.0.0 0 011 0 00:00:00:00:00:00 3f01 CP - FTOS# Example (show ip cam stack-unit ecmp-group member-info detail) FTOS#show ip cam stack-unit 0 po 0 ecmp-group member-info detail Group Index ----------- 0 FTOS# Member Count -----------2 Mac-Addr 00:01:e8:8a:d6:58 00:01:e8:8a:d6:58 Port VLan ID Te 0/3 0 Te 0/8 0 Gateway --------- 1.1.1.2 2.1.1.2 IPv4 Routing | 717