Autodesk 62205-051408-9001 User Guide - Page 581

Distort Filters ❚❘❘ Mode-Determines the type of rippling effect. Use To Pond Ripples Create ripples that move out from the center and that zigzag around the center at the same time. Out from Center Create very smooth, even ripples. Around Center Create ripples that spiral around the center point. Resize Image-Extends the ripple effect past the edge of the layer. Amplitude-Controls the height of the ripples. If you choose negative values, the ripples descend beneath the surface. Scale-Determines how far the ripples extend from the center. Aspect-Controls the elliptical shape of the ripples. A negative aspect creates horizontal ripples; a positive aspect makes them vertical. Wavelength-Is a measure of the size of the ripples. If the Wavelength is 100%, only one complete ripple fits in the image. Max Ridges-Controls the total number of ripples that can be generated. For example, set Max Ridges to 5 to create 5 rings of distortion; the areas inside and outside of the rings are unaffected. Spread-Determines the distance between the ripples and the center. Animate the spread to create continuous rippling of the image. Center-Sets the center around which the ripple extends. You can use the Set Position button to set the center. Shift Shift is similar to the Offset filter. You can use it to pan images or frames. Center-Sets a new center point for the layer. You can use the Set Position button to set the center. Invert-Shifts the image by the same amount in the opposite direction. For example, if the center is at X=10 and Y=10, Invert will shift the center to X=-10 and Y=-10. Undefined Areas-Determines what appears in the empty space created by shifting the layer. Spherize Use Spherize to make the image appear wrapped onto the outside surface of a sphere. 565